AUTO BIPAP


It is considered appropriate to use in cases where the BİPAP pressure cannot be tolerated, the effective BİPAP pressure is very variable, and the appropriate treatment pressure cannot be decided.

With BİPAP, it works with different pressure application in the same breathing, but different pressure ranges can be defined for inhalation and exhalation. It is more suitable for patients whose pressure needs vary widely according to different stages of sleep or lying position. It is especially suitable for patients who need high pressure. It is beneficial for those with low oxygen saturation in the blood.


Technical Specifications

PS

2…15 cmH2o (Pressure Support)

Max Ipap

3...30 cmH2o (up to 30.0 mbar in 0.1 mbar increments) Breathing

Min Ipap

3…30 cmH2o (up to 30.0 mbar in 0.1 mbar increments) Breathing

Max Epap

3…30 cmH2o (up to 30.0 mbar in 0.1 mbar increments) Exhaling.

Min Epap

3...30 cmH2o (up to 30.0 mbar in 0.1 mbar increments) Exhaling.

RAMP TIME

OFF / 5-10-15…90 MIN

RAMP PRESSURE

It can be adjusted between 3 - 30 mbar. It gradually rises to the IPAP / EPAP value.

TI

Inspiratory time (0.1-0.2-0.3...7.5 sec)

I SENSITIVITY

OFF / 1-2-3-4-5 It is the sensitivity to detect inspiration
(The sensitivity to detect the beginning of the breathing phase of breathing.).

E SENSITIVITY

OFF / 1-2-3-4-5 It is the sensitivity to detect expiration
(The sensitivity to detect the beginning of the exhalation phase of breathing.).

I-SLOPE

OFF / 1-2-3-4-5Length/rate of patient's breathing time
(Time taken by the device to go from EPAP (positive exhalation pressure level)
to IPAP (positive exhalation pressure level).

E-SLOPE

OFF / 1-2-3-4-5 Length/rate of the patient's exhalation time
(Time taken by the device to descend from IPAP (positive inspiratory pressure level)
to EPAP (positive exhalation pressure level).

TUBE DIAMETER

12mm/15mm/22 mm

SIGH

OFF / 300-350-400-450…1000 In one breath, it sends some extra air to the patient,
allowing him to take a deep breath. The device uses this feature
if the patient encounters conditions such as Apnea/Hypoapnea/Central Apnea during
therapy.
This feature is not suitable for use in patients with COPD.

PRESSURE UNIT

(hPa/mbar/cmH2o)